Olympus OM-1n reassembly
This post follows on from the last in the series and covers reassembly of the OM-1n camera.

This post follows on from the last in the series and covers reassembly of the OM-1n camera.

This post describes the procedure I used to strip down and repair an Olympus OM-1n 35mm SLR camera.

Using a vintage Sigma Mini-Wide 28mm lens on a modern mirrorles Fuji X-T1 camera

Cleaning and re-assembling the Carl Zeiss Werra Mat camera after it’s strip down and repair.

In this post I’m going to show how I cleaned the shutter of the Carl Zeiss Werra Mat and re-assembled it

The first part of a series describing how I stripped down and cleaned a Carl Zeiss Werra Mat 35mm camera.

The Yashica J is a 35mm rangefinder camera made in about 1961. It is of fairly simple construction with a limited range of settings and is fitted with a 45mm f/2.8 Yashinon lens.

The Fujica 35-SE is a 35mm rangefinder camera which was made in Japan by the Fuji Photo Film co in about 1959.

Stripping down a Pentacon Pentina 35mm leaf shutter SLR camera

This post describes a Zeiss Ikon Nettar II folding camera which was made in about 1949 and takes type 120 film

This post shows the sort of results available using a vintage Pentax 28mm SMC lens with a K5 DSLR camera.

The Kodak Retinette type 017 is a 35mm folding camera with a Prontor SV shutter and a Schneider-Kreuznach Reomar 50mm f/4.5 lens.